User guide

ADSL X6 User Guide30

If ALL of the wireless devices (clients) on the network are

Zoom devices, you need to enter the Passphrase that you

just entered for each device.

Every wireless network client needs to be set individually.

Open the software that came with the device, which should be

running on the computer where the device is installed. Find the

configuration menu for security, choose WEP, and enter the

Passphrase, exactly as you entered it on the

Wireless

Setup page.

Your security setup configuration is now complete!

If any or all of the other wireless devices on the network

(clients) are not Zoom devices, you will enter one of the

keys shown below the Passphrase on each client. You must

enter the same key for each device. The key that you must use

is the key corresponding to the Default Key number shown. If

the number in the default key box is 1, use Key 1, and so on.

You can choose the default key you prefer using the pull-down

Default Key menu box.

Now that you have a key, enter it for each client. Every

wireless network client needs to be set individually. Open the

software that came with the device, which should be running

on the computer where the device is installed. Find the

configuration menu for security, choose WEP (64-bit or 128-

bit depending on what you selected), and enter the Default

Key, exactly as it appears on the

Wireless Setup page.

Your security setup configuration is now complete!