User guide

ADSL X6 User Guide58
The following table describes Routing Table settings. If you change
any of the settings, click Add, and then Write Settings to Flash.
Setting Description
Existing Routes
This table shows the existing Static routes
set up on your ADSL Modem.
Destination
Enter the
subnet IP address
of the
destination.
Gateway
Enter the
Gateway IP address
of your
destination’s subnet. The HOP gateway
must be on the same subnet as the
modem.
Mask
Enter the
subnet mask
(range of IP
addresses) of the destination IP addresses
based on the above subnet IP address of
the destination.
Metric
The number of hops.
This should usually
be left at 1
.
Advertise
Enable this if you want to advertise this
route.