User guide

ADSL X6 User Guide70
Setting Description
Port
If you selected
TCP
or
UDP
, you must
specify the port where you want to allow
access. If you want multiple ports to be
open, add a virtual server for each port that
you want open. If you selected
DMZ
, you
cannot specify a port.
Using the ADSL Settings
Do I need to change my ADSL settings?
Typically you should not need to change your ADSL settings;
however, you may be instructed to do so by your service provider.
Or, if you are having problems establishing a physical layer
connection, you may want to change a couple of the settings on the
ADSL Configuration page. Here is a picture of the ADSL page
where you change your settings:
The following table shows you the values to enter. After you enter
the values, click Save Changes, then Write Settings to Flash.