User guide
ADSL X6 User Guide84
QoS is normally set up by using the Install Assistant CD that
comes with the X6. To configure Quality of Service on the
Advanced Setup page instead, click QoS. For a help message,
select the Click here link in the first paragraph.
Note that on the QoS screen, Port 1 is the Ethernet port labeled
LAN 1 on the X6 back panel. Port 2 is LAN 2, and so forth.
Setting Description
Do you want to turn
on QoS . . . .?
If you click
YES
to assign priorities to the
X6’s LAN and wireless ports, by default
LAN port 1 is set to High Priority, LAN port
2 is set to Medium Priority, and LAN ports 3
and 4 as well as the wireless port are set to
Standard priority. These default settings
can be changed.
The default is
NO
.
Which ports should
be High Priority?
Select one to three ports. By default, these
ports will together share 70% of the
upstream bandwidth. You can configure a
different percentage on the
Advanced