User guide

ADSL X6 User Guide86
share?
percentages together must be < 100.
Note
: Standard Priority ports must have
at least 1% of the upstream bandwidth.
Return Main QoS page
Click to return to the main QoS page.
After you make your selections, click Save Changes, then Write
Settings to Flash.
Monitoring ADSL, Wireless, and
Ethernet Status
How should I use the ADSL, Wireless, and
Ethernet Status Reports?
These reports are useful tools for evaluating your system and for
troubleshooting. Should a problem arise, a Technical Support
Representative may ask you for the information that is contained in
the reports.
Wireless Status Report
Here is a picture of a typical Wireless Status Report:
The Wireless Status Report shows you the modem speed (Link
Speed), the SSID, your default channel, the Mac Address of the
modem, and the number of packets that are being received and
transmitted (Rx and Tx Packets). You can also tell if your modem