User guide

ADSL X6 User Guide98
The following table describes the back panel.
Port Description
PWR
Port to connect the unit to the
X6
’s power cube.
RESET
Recessed button to reset the modem to its factory settings.
To reset, insert a paper clip and press the button three times.
LAN 1
LAN 2
LAN 3
LAN 4
LAN ports that can connect the unit to an access point, a
network hub, or the Ethernet port of a computer. The
X6
has
four LAN ports.
Each port has a yellow and a green light above it. The yellow
light turns on when the port is connected to a 100 megabit
per second Ethernet port. The green light blinks when there
is activity on that particular LAN line.
ADSL
Jack to connect the modem to the ADSL telephone wall jack.