Operation Manual

107
■
MIDI messages output when Base
Station knobs and buttons are used
The MIDI messages sent when controls,
including 1, 2, 3,
e
, R,
T
and
m
, are used can be edited
• Use e to select Knob/Button,
and press E.
• Use e to select the knob or button to
edit.
The settings for the selected knob or button
will appear on the display with the setting
values at the bottom.
• Use 1, 2 and 3 to edit the MIDI
message.
You can set the values as detailed on the
next page.
■
MIDI messages output when the
Ring Controller is moved
The MIDI messages sent when the Ring Con-
troller is moved in the X and Y directions can be
edited.
• Use e to select X-Axis or Y-Axis
• Use 1, 2 and 3 to edit the MIDI
message.
You can set each value as follows.
MIDI Ch CC Number Min Value
1-16
OFF –
0-127 0-127
HINT
Sent values will be in a range from the Min
Value set by
3 to 127.
MIDI message settings (continued)