Operation Manual

115
■
Full testing
1. Press M.
2. Use e to select Settings,
and press E.
This opens the Settings screen.
3. Use e to select SD CARD,
and press E.
4. Use e to select Performance
Test, and press E.
5. Use e to select Full Test,
and press E.
The amount of time required and a conrmation
message appears.
6. Use e to select Yes,
and press E.
This will start the full SD card test.
7. The test completes.
The result of the test will be shown.
NOTE
Even if a performance test result is "OK", there
is no guarantee that writing errors will not occur.
This information is just to provide guidance.
Testing SD card performance
You can test whether an SD card can be used
with the A. A basic test can be done
quickly, while a full test examines the entire SD
card.
■
Quick testing
1. Press M.
2. Use e to select Settings,
and press E.
This opens the Settings screen.
3. Use e to select SD CARD,
and press E.
4. Use e to select Performance
Test, and press E.
5. Use e to select Quick Test,
and press E.
This will start the quick SD card test.
6. The test completes.
The result of the evaluation will be
shown.
SD card management (continued)