Operation Manual

120
Ring Controller function
settings
In this section, we explain setting items that can
be used when connected to the Base Station.
HINT
Using the Ring Controller for MIDI control
(
→
P. 125)
1. Press M.
2. Use e to select CONTROLLER,
and press E.
3. Use e to select Setting, and
press E.
This opens the Ring Controller Setting
screen.
4. Use e to select menu items and
E to conrm them.
Press M to move up one level in the
menu.
■
Setting the LED brightness
(LED Brightness)
• Use e to select LED brightness.
Select Low or High.
■
Automatic grip setting
(Auto Grip)
You can set automatic grip to ON or OFF.
• Use e to set the automatic grip setting.
Select O or On.
■
Changing the PAD layout
You can change the number of instruments
that can be played when pad layout is
selected (
→
P. 82).
NOTE
Press M to reopen the regular screen.
Disabling the grip area setting will also reopen
the regular screen.
On this screen, press
C to stop parameter
control with the Ring Controller. Press C
again to resume parameter control with the
Ring Controller.
■
Disabling the grip area setting
1.
CONTROLLER
Press g.
All the Ring Controller LEDs will light
blue.
2. Place the Ring Controller on the
Base Station.
3.
CONTROLLER
Press g.
This disables the grip area setting,
making all pads usable again.
HINT
If automatic grip cancellation (
→
P. 120) is ON,
the grip area will automatically be canceled
when the Ring Controller is placed on the Base
Station.
Ring Controller settings (continued)