Operation Manual

126
3. Double-click the Bluetooth icon.
This opens the Bluetooth Configuration
screen.
4. Click "Connect" for the Ring
Controller shown in the list.
When connection succeeds, all of
the LEDs will blink blue on the Ring
Controller.
NOTE
If connection fails, open the System Prefer-
ences and click the × next to the Ring Control-
ler in the list of Bluetooth devices before trying
again.
■
Connecting with iOS devices
1. Launch an app that supports MIDI
over BLE on the iOS device.
2. On the app Settings screen, con-
duct Bluetooth connection.
When connection succeeds, all of
the LEDs will blink blue on the Ring
Controller.
HINT
For app setting procedures, see the manual for
that app.
HINT
• These settings can also be made by pressing
M on the Base Station and using the
CONTROLLER > Setting > For Mac/iOS item.
• For velocity and other setting items in
common with the A, refer to "Ring Con-
troller settings" (
→
P. 118).
Connecting with Mac/iOS
devices
Using Bluetooth LE, you can connect the Ring
Controller directly to a Mac or iOS device, and
use it as a MIDI controller.
NOTE
To use this function, turn the Base Station
power OFF or disconnect from it (
→
P. 118).
■
Switching the Ring Controller mode
1.
CONTROLLER
Press s.
This puts the Ring Controller into setup
mode.
2.
CONTROLLER
Tap the pad for
Mac/iOS BLE mode.
This puts the Ring Controller into Mac/
iOS mode.
■
Connecting with a Mac
1. Open the Audio MIDI Setup appli-
cation on the Mac
2. Select Window in the menu bar,
and then Show MIDI Window.
This opens the MIDI Studio window.
Using the Ring Controller for MIDI control (continued)