Operation Manual

128
Accelerometer
You can use the Ring Controller accelerometer
to send MIDI messages.
NOTE
• This can be used when the Ring Controller
grip area has been set (
→
P. 119).
• The grip area determines the directions of the
X and Y axes.
Y axis
0
127
127
0
X axis
MIDI messages sent
X axis: Control Change 85, 0–127
Change occurs in a range from level (0°) to
upside down (180°).
Y axis: Control Change 86, 0–127
Change occurs in a range from level (0°) to verti-
cal (90°).
■
Turning the accelerometer ON/OFF
1.
CONTROLLER
Press z.
The z LED lights, and the acceler-
ometer turns ON.
2.
CONTROLLER
Press z again
to turn the accelerometer OFF.
The z LED becomes unlit, and the
accelerometer turns OFF.
Restoring default settings
1.
CONTROLLER
While pressing
s , turn the Ring Controller on.
This enables factory reset mode.
2.
CONTROLLER
Tap the pad with a
blinking LED.
This restores the Ring Controller to its
default settings, and turns the Ring Con-
troller o automatically
■
Restoring default settings from the
Base Station
You can use the Base Station to restore the Ring
Controller to its factory default settings.
1. Press M .
2. Use e to select CONTROLLER,
and press
E.
3. Use e to select Setting,
and press
E.
4. Use e to select Factory Reset,
and press
E.
This opens a conrmation screen.
5. Use e to select Yes,
and press
E.
This restores the Ring Controller to its
factory default settings.
Other functions