Operation Manual

150
HINT
• When the velocity is 127, it takes 20 millisec-
onds for the specied value to be reached.
• When the velocity is 1, it takes 2 seconds for
the specied value to be reached.
Example: Pad at Column 12, Row 2 (when MIDI
channels 1 and 2 are selected)
The Control Change number is 25 (19h) and the
MIDI channel is 1 (00h).
· When this pad is tapped (gently) with a veloc-
ity of "b0h" (Control Change/MIDI ch), "19h"
(Control Change Number) and the "value" start
to be transmitted. For two seconds, this mes-
sage will be continuously transmitted as the
value changes. Transmission will stop when
the value reaches 23. The pads at Row 2,
Column 12–15 will also light pink.
· The Row 2, Column 12–15 pads will also light
pink if "b0h" (Control Change/MIDI ch), "19h"
(Control Change Number) and "17h" are trans-
mitted to the Ring Controller.
Column 12、
Row 2
■
FADER layout
This lets you use the Ring Controller as faders. The pads on half of each ring comprise a single fader.
The transmitted MIDI messages are Control Change (number and specied value). You can change the
amount of time until the specied value is reached according to the velocity when pressing the pads.
Control Change number
Row
0 1 2 3 4
Column
0
24 25 26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
23 22 21
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Value
Row
0 1–3 (common) 4
Column
0 127
1 123
2 114
3 105
4 96
5 87
6 78
7 69
8 59
9 50
10 41
11 32
12 23
13 14
14 5
15 0
16 0
17 5
18 14
19 23
20 32
21 41
22 50
23 59
24 69
25 78
26 87
27 96
28 105
29 114
30 123
31 127
Ring Controller MIDI messages (continued)