Operation Manual

151
■
PROGRAMMER mode
This mode allows you to program the LED lighting of each pad as you like.
Row
0 1 2 3 4
Column
0 0 0 32 64 32
1 1 1 33 65 33
2 2 2 34 66 34
3 3 3 35 67 35
4 4 4 36 68 36
5 5 5 37 69 37
6 6 6 38 70 38
7 7 7 39 71 39
8 8 8 40 72 40
9 9 9 41 73 41
10 10 10 42 74 42
11 11 11 43 75 43
12 12 12 44 76 44
13 13 13 45 77 45
14 14 14 46 78 46
15 15 15 47 79 47
16 16 16 48 80 48
17 17 17 49 81 49
18 18 18 50 82 50
19 19 19 51 83 51
20 20 20 52 84 52
21
21 21 53 85 53
22 22 22 54 86 54
23 23 23 55 87 55
24 24 24 56 88 56
25 25 25 57 89 57
26 26 26 58 90 58
27 27 27 59 91 59
28 28 28 60 92 60
29 29 29 61 93 61
30 30 30 62 94 62
31 31 31 63 95 63
2 1 1 1 2
MIDI Channel
Example: Pad at Column 12, Row 2 (when MIDI
channels 1 and 2 are selected)
The note number is 44 (2ch) and the MIDI chan-
nel is 1 (00h).
· When this pad is tapped, "90h" (Note on/MIDI
ch), "2ch" (Note Number) and the velocity are
transmitted.
· This pad's LED will also light in the color cor-
responding to the velocity if "90h" (Note on/
MIDI ch), "2ch" (Note Number) and a velocity
are transmitted to the Ring Controller.
The LEDs of the top and bottom inner rings
respond to MIDI channel 2.
· The LED of the pad at Column 0, Row 0 will
also light in the color corresponding to the
velocity if "91h" (Note on/MIDI ch), "00h" (Note
Number) and a velocity are transmitted to the
Ring Controller.
Column 12、 Row 2
Column 0、
Row 0
Ring Controller MIDI messages (continued)