Operation Manual

19
HINT
Even when the Base Station is OFF, if it is con-
nected to a power supply, it can recharge the
Ring Controller.
■
Putting the Ring Controller to sleep
When the Ring Controller is charging, the power
will not turn OFF. Instead, it will go to sleep.
1.
CONTROLLER
Press and
hold p.
2.
CONTROLLER
Press and hold
p to wake it from sleep.
HINT
When asleep, the Ring Controller p
LED will light red (charging) or blink red (not
charging).
■
Turning the Ring Controller OFF
To turn the Ring Controller OFF, follow these
steps when it is not charging.
1.
CONTROLLER
Press and hold
p for at least 7 seconds
when not charging.
2.
CONTROLLER
Press and hold
p to turn the power on.
NOTE
• When the power is OFF, the p LED
becomes unlit.
• When the Ring Controller's power is OFF, if
you place it on a Base Station that is con-
nected to power, recharging will start auto-
matically and the Ring Controller will do the
following.
- Turn ON (if Base Station is ON)
- Sleep (if Base Station is OFF)
Turning the power on and o (continued)