Operation Manual

31
2. Use 1 to select the scale.
You can select from the following.
Chromatic, Major (Ionian), Harmonic Minor,
Melodic Minor, Dorian, Phrygian, Lydian,
Mixolydian, Aeolian, Locrian, Super Locrian,
Major Blues, Minor Blues, Diminished, Com
Dim, Major Pentatonic, Minor Pentatonic,
Raga1 (Bhairav), Raga2, Raga3, Arabic,
Spanish, Gypsy, Minor Gypsy (Hungarian
Minor), Egyptian, Hawaiian, Pelog, Hiro-
joshi, In-Sen, Iwato, Kumoi, Miyakobushi,
Ryukyu, Chinese, Whole Tone, Whole Half,
5th Interval
■
Changing the key (Key)
You can change the key when the scale is set to
anything other than Chromatic.
1. When in SCALE layout, use e to
open page 3 at the bottom of the
display.
2. Use 2 to change the key.
You can select from C, C#, D, D#, E, F, F#, G,
G#, A, A# and B.
NOTE
The Ring Controller layout also changes
according to the key setting.
2. Use 2 to set the glide value.
This can be set from 0 to 100.
The higher this value is set, the more
gradual the change will be.
■
Octave setting (Octave)
You can change the note range that can be
played on the Ring Controller.
1. When in SCALE layout, use e to
open page 1 at the bottom of the
display.
2. Use 3 to change the octave.
The octave shown will start on pad 1.
■
Changing the scale (Scale)
The layout of notes on the Ring Controller
changes according to the scale set.
This allows you to assign only notes from the
desired scale to the Ring Controller.
1. When in SCALE layout, use e to
open page 3 at the bottom of the
display.
Real-time pattern input (continued)