Operation Manual

32
3. Turn 1 to change the arpeggiator
style.
The style can be set to Repeat,
Sequence, Up, Down, Up & Down, or
Random.
The selected Style changes the arpeg-
giator type and the functions of
2
and
3
as shown in the table on the follow-
ing page.
4. Press H to end arpeggiator
setting.
When the arpeggiator is enabled, the
display changes when you tap a pad.
At this time, you can use e to turn the
arpeggiator OFF.
This function can be used to make an instru-
ment play automatically when triggered by a
pad. Pressing multiple pads will trigger multiple
instruments in order.
By pressing chord tones in SCALE layout, the
notes in the chord can be played back one at a
time.
1. Press H.
This opens the arpeggiator setting
screen.
2. Use e to select any setting
other than OFF.
When ON is selected, sound will be
output automatically while pads are being
pressed.
When ON (Latch) is selected, sounds will
automatically start output when pads are
pressed and stop when their pads are
pressed again.
HINT
Automatic output in ON (Latch) mode can also
be stopped by pressing S.
Arpeggiator