Operation Manual
37
In PAD layout
The 5 rings (3 when set to Guideline display) on the Ring Controller each show a dierent instrument.
You can use
e
to change which instruments are shown by which rings.
Since multiple instruments can be shown by the Ring Controller, you can check instruments that have
already been input as you input the next instrument.
Select the instrument shown
on the top ring
e
e
When instrument 2 is selected:
Top ring shows the sequence
for instrument 2
Side ring shows the sequence
for instrument 3
In SCALE layout
You can use e to select the note input.
Select the note shown on
the top ring
e
e
When C#2 is selected:
Top ring shows C#2
sequence
Side ring shows D2
sequence
C1 C2 C3 C4 C5
STEP mode overview (continued)