Operation Manual

45
2. Use e to select an instrument
that has a motion sequence
recorded.
HINT
This step is not necessary when clearing eect
parameter motion sequences.
3. Press C.
This opens a screen where you can clear
sequences for the selected instrument.
4. Use e to select the motion
sequence you want to clear.
Effect parameter motion sequences are
next to “All Instruments” and “All Notes”.
5. Press E to conrm
This opens a conrmation screen.
6. Use e to select Yes,
and press E.
This clears the sequence for the selected
parameter.
Recording motion sequences
step by step
1. Select the pattern for which you
want to record a motion sequence.
2. Press R.
3. Use u to move to the step where
you will change a parameter.
4. Use eect buttons and change
Quick Access function parameters,
for example.
Changes are recorded, and recorded
parameter values are shown in red.
5. Press R or S when done
recording.
Clearing motion sequences
1. Select the pattern for which you
want to clear the motion sequence.
Motion sequences (continued)