Operation Manual
47
NOTE
When you switch the Auto Save setting from
Off (LOCK) to On, a screen will appear to
conrm whether you want to save the current
settings. If you select "No", the current settings
will not be saved, but future changes will be
saved.
Quantization setting
This sets the shortest note length that can be
input into the sequence.
This setting is the value that will be used to cor-
rect (quantize) real-time input.
When using the capture function and "Capture
with metronome" is enabled, capturing will start
using the quantization time set here.
Example with 1/16 quantization
Instrument
Real-time input
Bar 1
Sequence is aligned to 16th notes even if played timing is off
Bar 2
Pattern length setting
You can change the pattern length and set it
between 2 and 8 bars.
When making a pattern longer, you can also
copy the sequence you have already input to the
lengthened part.
When a pattern is shortened, the already input
sequence will not be cleared.
Pattern settings include Auto Save, Quantize,
Bar length, and Swing, as well as Ring Controller
Accelerometer parameters.
These settings are saved separately for each
pattern.
Auto Save setting
You can set whether or not the results of
changes to sounds and eects are saved to the
pattern.
When Auto Save is set to O (LOCK), the results
of changes to sounds and effects will not be
saved to the pattern. Changes made will be dis-
carded when you switch to song or looper mode
or select a different pattern. Moreover, you will
not be able to save sequences.
This setting is useful when you want to change
sounds during a live performance, for example,
but do not want to save the results or change
pattern settings.
1. Press M.
2. Use e to select Auto Save,
and press E.
3. Use e to make the Auto Save
setting, and press E to conrm.
Pattern settings