Operation Manual

48
Swing setting
The amount of swing (rhythmic groove) can be
set. The swing range is ±50%.
Ring Controller accelerometer
settings
The Ring Controller accelerometer can be used
to control the effect parameters and param-
eters controlled by 1, 2 and 3 in INST
mode (Quick Access functions
→
P.92), as
well as arpeggiator notes and repetition speed.
Parameters can be changed by tilting the Ring
Controller.
Y axis
X axis
NOTE
• This can be used when the Ring Controller
grip area has been set (
→
P. 119).
• The directions of the X and Y axes are auto-
matically set based on the grip area position.
• Do not hit the Ring Controller with excessive
force.
■
Assigning parameters
1. Select Ring Controller
Accelerometer.
This opens the X-axis parameter assign-
ment screen.
2. Use e to select parameter 1, 2
or 3 to be assigned to the X axis,
and press E.
3. Use e to select the parameter
to assign, and press E.
4. After assigning the parameter,
select NEXT, and press E.
This opens the Y axis parameter assign-
ment screen.
5. Assign parameters to the Y axis in
the same way as the X axis, select
FINISH, and press E.
This completes the setting of parameters
controlled by the Ring Controller.
NOTE
The lowest-numbered assigned parameters
are shown on the Pattern Settings screen.
If multiple parameters have been assigned,
"+" will appear next to that parameter name to
show that others have also been assigned.
Pattern settings (continued)