Operation Manual

63
Make capture settings
• Set to stereo or mono
… Switching between stereo and mono (
→
P. 69)
• Stop recording captured audio after a number of beats set in advance
… Setting the auto stop function (
→
P. 69)
• Listen to a pre count or guide click when capturing audio
… Using the metronome while capturing audio (
→
P. 70)
Play the material to capture
• Play a pattern or song, for example, that you want to use as a captured recording.
• Input from the sound source connected to the INPUT jacks.
External input
Play patterns,
songs, etc.
Start capturing
Press c to start capturing.
External input
Audio files
Play patterns,
songs, etc.
Stop capturing
Press c again to stop capturing.
On the setting screen that appears after captur-
ing stops, you can assign it to pads and set the
range that is sounded, for example.
External input
Audio files
Play patterns,
songs, etc.
Save
You can select and save captured audio to use
as an instrument or in LOOPER mode.
Captured audio can also be saved to an SD
card without changing its name or using it as an
instrument or in LOOPER mode.
External input
Audio files
Play patterns,
songs, etc.
Operation summary