Operation Manual

64
Capturing internal sound
sources
1. Play a pattern or song, for exam-
ple, that you want to capture.
HINT
By inputting audio through the INPUT jacks
at the same time, you can capture a mixed
recording of both sound sources.
2. Press c.
The capture screen opens, and capturing
starts.
Press C to cancel.
HINT
• Up to 6 minutes stereo or 12 minutes mono
can be captured.
• If "Capture with METRONOME" is set, the
timing of capture start will automatically be
adjusted to the beat, for example (
→
P. 70).
• Turning effects ON/OFF, changing parame-
ters, playing pads, and changing patterns, for
example, will be recorded while capturing.
3. After the audio has been captured,
press c.
You can adjust the captured recording
and save it on the Capture Setting screen
that opens (
→
P. 65).
Capturing external input
1. Connect the instrument or other
audio device that you want to use
to capture recordings to the Base
Station INPUT jacks.
HINT
If the external input is a mono audio source,
check the external input Stereo/Mono setting
(
→
P. 103).
2. Start playing the connected
equipment.
Use the INPUT volume to adjust the input
level.
NOTE
If the input level is too high, c will flash
rapidly.
3. Press c.
The capture screen opens, and capturing
starts.
HINT
You can use "Capture with METRONOME" to
set a precount and a guide click (
→
P. 70).
4. After the audio has been captured,
press c.
You can adjust the captured recording
and save it on the Capture Setting screen
that opens.
Capturing audio