Operation Manual

66
7. Tap pads to select ones for
assignment.
Tap pads to listen to the instruments cur-
rently assigned to them.
8. To save the captured audio to the
SD card without assigning it to a
pad, use e to select "Save
only", and press E.
This will save the captured audio as a
WAV le to the SD card.
You can use it as an instrument and in
LOOPER mode later (
→
P. 71).
9. To assign it to a pad,
use e to select Assign,
and press E.
This assigns the captured audio to the
selected pads.
This also saves the captured audio as a
WAV le to the SD card.
HINT
• The captured audio will be saved inside the
“Capture” subfolder in the “AR-96” folder on
the SD card.
• The capture name will be used unchanged
as the le name.
• captured audio that has been assigned to
a pad can have envelopes, lters and other
parameters set in the same way as the
built-in instruments.
3. Use 2 to set the playback direc-
tion of the captured audio.
When this is On, playback will be
reversed.
4. Use e to select "Assign to INST
PAD", and press E.
The screen where you can assign cap-
tured audio to pads opens.
Press M or C to return to the previ-
ous screen.
5. To change the name of the cap-
tured audio, use e to select
RENAME, and press E.
You can edit the name of the captured
recording.
6. Use u to select the pattern to
which to assign the captured
recording.
The pattern name changes at the bottom
of the screen.
Capturing audio (continued)