Operation Manual

68
7. Tap pads to select ones for
assignment.
Pads that already have captured audio
assigned will light with their set colors.
Unlit pads can be selected. Selected
pads will light white.
8. To save the captured audio to the
SD card without assigning it to a
pad, use e to select "Save
only", and press E.
This will save the captured audio as a
WAV le to the SD card.
You can use it as an instrument and in
LOOPER mode later (
→
P. 71).
9. To assign it to a pad,
use e to select Assign,
and press E.
This assigns the captured audio to the
selected pads.
This also saves the captured audio as a
WAV le to the SD card.
NOTE
Assign cannot be selected if no pads have
been selected.
Capturing audio (continued)