Operation Manual

71
In LOOPER mode, you can combine patterns and songs that have already been created, input from
the INPUT jacks, WAV les and other captured audio into a single song as a looper sequence.
…
Playback order →Looper sequence
16 sounds
maximum
simultaneous
playback
(mono)
Capture 1 Capture 1 Capture 1 Capture 1 Capture 1 Capture 1
Capture 3
Capture 2 Capture 2 Capture 2 Capture 2
…
32 captured recordings are assigned to the Ring Controller pads.
The captured recordings assigned to the pads can be changed. The same captured recordings are
assigned to the top, side and bottom rings.
LOOPER mode has A, B and C pad banks. By changing banks, you can assign 32 dierent captured
recordings to the Ring Controller.
Capture 1
Switch pad bank
(A, B, C)
Capture 2
u
Capture 3
Capture 32
Capture 31
Capture 30
Capture 33
Capture 50
Capture 51
The captured
recordings
assigned to
each pad can
be changed
After completing preparation, start real-time input and tap pads to play their captured recordings. Up
to 16 captured mono recordings can be played back at the same time.
Looper
sequence
1
31
2
32
95
…
53
54
…
96
3
…
65
39
40
41
66
67
…
…
…
Captures
Real time input
Capture 1 Capture 1
Capture 2 Capture 2
Capture 3
Capture 1 Capture 1
HINT
See "Captured recordings" (
→
P. 61) for how to create captured recordings.
LOOPER mode
LOOPER mode overview