Operation Manual

77
■
Setting capture quantization
You can set the timing of captured audio
playback.
1. Select a captured recording.
2. Use 3 to change the
quantization.
HINT
Quantization is applied in the following
situations.
• When playback of captured audio starts
• When Gate or Toggle stops
Making capture settings
■
Setting the capture playback
method
You can set what happens after a captured
recording plays back.
1. Select a captured recording.
2. Use 2 to change the playback
method.
One Shot: The captured recording plays
once and stops.
Toggle: Tapping the pad alternately starts
and stops playback of the captured
audio.
Gate: The captured audio plays back in
a loop while the pad is being pressed.
Playback stops when it is released.
■
Setting the pitch of the captured
recording
1. Select a captured recording.
2. Use 1 to change the pitch.
Looper settings