Operation Manual

79
Mixing
1. Press m.
This opens the Mixer Screen.
You can set send effects and STEREO/MONO
for audio input through the INPUT jacks.
HINT
Mixer (
→
P. 100)
5. Set the parameter to assign to the
X axis.
6. Select NEXT, and press E.
This opens the Y axis parameter assign-
ment screen.
7. Assign parameters to the Y axis in
the same way as the X axis, select
FINISH, and press E.
This completes the setting of parameters
controlled by the Ring Controller.
Selecting the default pad bank
You can set the pad bank that starts selected
when looper mode is activated or a looper
sequence is loaded.
1. Press M.
2. Use e to select Default PAD
BANK, and press E.
3. Use e to select a pad bank,
and press E.
You can select A, B or C.
HINT
The Ring Controller accelerometer and default
pad bank settings are saved as settings for the
selected looper sequence.
Looper settings (continued)