Operation Manual

88
■
Selecting captured audio les and
WAV les
WAV les saved in the “Capture” subfolder in the
"AR-96" folder on the SD card can be selected.
1. Press D.
2. Use e to select the oscillator
block, and press E.
3. Press M repeatedly to open the
top category level, and use eto
select Audio File.
Selectable WAV les will be shown.
4. Use e to select a le,
and press E.
This selects the le as an oscillator.
NOTE
When an audio le is selected as an oscillator,
the lter and other parameters will be reset to
default values.
Oscillator block settings
This sets the basic instrument sound.
■
Selecting internal sound sources
Internal sound sources, which include drum
sets, percussion instruments, and synthesizers,-
can be selected.
1. Press D.
2. Use e to select the oscillator
block, and press E.
This opens the oscillator list.
Press M to move up one category
level.
Press M at the top level to return to the
EDIT screen.
HINT
• The check shows the currently selected
oscillator.
• You can also use the u buttons to change
categories.
3. Use e to select the oscillator,
and press E.
This selects the oscillator.
Editing sounds (continued)