Operation Manual

90
Insert eect block settings
You can use up to 4 insert eects at the same
time.
1. Press D.
2. Use e to select the insert eect
block, and press E.
This selects the inside of the block.
3. Use e to select the eect type,
and press E.
This selects the outside of the block.
HINT
See the "Eect list" appendix for details about
insert eects (
→
P. 141).
NOTE
The number of insert effects being used is
shown at the bottom right of the eect icon.
If 4 insert eects are already being used, more
eects cannot be selected.
In this case, a message will appear showing
which instruments are using effects. You can
turn o unneeded eects and try again.
Modulation blocks settings
In modulation blocks, you can use envelopes
and LFOs to alter parameters for blocks, includ-
ing the oscillator and lter.
1. Press D.
2. Use e to select a modulation
block, and press E.
This selects the inside of the block.
3. Use e to select the modulation
type.
Select Off, Envelope, LFO 1, LFO 2, or
Aftertouch.
Editing sounds (continued)