Operation Manual

99
Turning eects ON/OFF
1. During pattern, song and looper
sequence playback, press and
hold w, x, y or
z for the eect you want to
use.
The effect is turned on only while the
button is being pressed.
CONTROLLER
Press the button
for the eect you want to use. When
using the Ring Controller, just pressing
the button will hold the eect.
HINT
• Multiple eects can be turned on at the same
time In this case, information about the eect
turned on last appears on the display.
• When an eect is on, its Ring Controller eect
button LED lights.
1. To hold an eect, press w,
x, y or z while
pressing H.
The effect will stay on even after its
button is released.
HINT
Multiple eects can be held at the same time
2. To stop holding an eect, press
H while pressing its button
(w, x, y or z).
CONTROLLER
Press the button for
the eect you want to stop holding.
Changing eect types
1. During song playback, press
w, x, y or z for
the eect type you want to change.
The type of the selected effect appears
on the display.
2. Use e to change the eect type.
Changing parameters
1. Press w, x, y or
z for the eect you want to
change.
The parameters of the selected effect
appear on the display.
HINT
When multiple eects are being held, press the
button of the eect you want to change.
2. Turn 1, 2 and 3 to change
the parameters you want.
Using eects