Specifications

38
Effect Types and Parameters
Effect Types and Parameters
036 Bass Pre This is a preamp model with a semi-parametric equalizer for the mid-range.
Knob1 Knob2 Knob3
Page01
Bass 0–10 Trebl 0–10 Level 0–150 P
Adjusts the low frequency level. Adjusts the high frequency level. Adjusts the output level.
Page02
Mid -10–10 Freq 100Hz–4.5kHz
Adjusts the middle frequency level.
Adjusts the center frequency of the
mid-range.
037 AC Bs Pre This is a preamp model with a graphic equalizer.
Knob1 Knob2 Knob3
Page01
Gain 0–100 Depth 0–10 Level 0–150 P
Adjusts the gain. Adjusts the low frequency level. Adjusts the output level.
Page02
Bass -10–10 L-Mid
-10 – 10 LM_F 32Hz–6.3kHz
Adjusts the low frequency level. Adjusts the low mid frequency level. Adjusts the L-Mid center frequency.
Page03
Mid -10–10 H-Mid -10–10 Trebl -10–10
Adjusts the middle frequency level. Adjusts the high mid frequency level. Adjusts the high frequency level.
038 SVT Simulation of the ultimate rock bass amp, the Ampeg SVT.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
Ultra
Off, Low, Hi,
Both, Cut
CAB See Table 1 Mix 0–100
Emphasizes high and low frequencies. Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
039 B-Man Simulation of the Fender Bassman 100.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
Deep On/Off CAB See Table 1 Mix 0–100
Adjusts the low-frequency character. Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
040 HRT3500 Simulation of the Hartke HA3500 famous for its aluminum cone.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz TUBE 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the mix of tube and transistor
type sounds.
Adjusts the output level.
Page03
Comp Off,1–10 CAB See Table 1 Mix 0–100
Adjusts the amount of compression. Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
041 SMR SimulationoftheSWRSM-900,famousforitshi-fisound.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
ENHNC 0–10 CAB See Table 1 Mix 0–100
This tone control changes the frequency
and level according to the knob position.
Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.