Specifications

40
Effect Types and Parameters
Effect Types and Parameters
047 G-Krueger Simulation of the famous metal bass amp Gallien-Krueger 800RB from the eighties.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
Color
Off, Low, Mid,
Hi
CAB See Table 1 Mix 0–100
Adjusts the preset tone. Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
048 Heaven This simulation of the Eden WT-800 can be used with a wide variety of playing styles.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
ENHNC 0–10 CAB See Table 1 Mix 0–100
This tone control changes the frequency
and level according to the knob position.
Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
049 Mark B This simulates the Italian Markbass Little Mark III.
Knob1 Knob2 Knob3
Page01
Bass -10–10 Mid -10–10 Trebl -10–10
Adjusts the low frequency level. Adjusts the middle frequency level. Adjusts the high frequency level.
Page02
Mid_F 32Hz–6.3kHz Gain 0–100 P Level 0–150
Adjusts the center frequency of the
mid-range.
Adjusts the gain. Adjusts the output level.
Page03
Color 0–6 CAB See Table 1 Mix 0–100
Adjusts low and high frequencies. Selects the cabinet.
Adjusts the mix balance of the signal after
the pre-amp and the signal after the cabinet.
050 Tremolo This effect varies the volume at a regular rate.
Knob1 Knob2 Knob3
Page01
Depth 0–100 Rate 0–50
P Level 0–150
Adjust the depth of the modulation. Adjusts the rate of the modulation. Adjusts the output level.
Page02
Wave
UP0–UP9,
DWN0–DWN9,
TRI0–TRI9
Sets the modulation waveform.
051 Slicer This effect creates a rhythmical sound by continuously slicing the input.
Knob1 Knob2 Knob3
Page01
PTTRN 1–20 Speed 1–50
Bal 0–100 P
Sets effect pattern. Sets modulation speed.
Adjusts the balance between original
and effect sounds.
Page02
THRSH 0–50 Level 0–150
Adjusts effect threshold. Adjusts the output level.
052 4-Phaser This is a 4-stage phaser effect that produces a swooshing sound.
Knob1 Knob2 Knob3
Page01
Rate 0–50
P Reso -10–10 Level 0–150
Adjusts the modulation rate.
Adjusts the intensity of the effect character. Adjusts the output level.
Page02
LoCut Off–800Hz
Sets the cut frequency in the low
range of the effect sound.