User's Manual

16
Setting Specific Patch Parameters
Setting Specific Patch Parameters
6
To set an expression pedal function
Set the control destination.
Set the adjustment range.
• Turnoftherighteffect.
• Turnoftherighteffecttosettheminimumvalue.
• Turnoftherighteffecttosetthemaximumvalue.
NOTE
• INPUTVOL: Usethistocontroltheinputlevel.
• OUTPUTVOL: Usethistocontroltheoutputlevel.
• NOASSIGN: Nofunctionisassigned.
• BAL: Thebalancebetweentheoriginalsoundandthe
effect sound can be adjusted.
• Turntoshowthedifferentparametersthatcanbecontrolledby
the expression pedal.
• See“Effecttypesandparameters”fordetailsabouttheparameters
that can be controlled for each effect.
• Rhythmandlooperoutputlevelsare notaffectedwhencontrolling
the Output Volume with an expression pedal.
HINT
• Theminimumvaluecanbesethigher thanthemaximumvalue.
When set this way, pushing the pedal down decreases the effect,
while letting it up increases the effect.
HINT