User's Manual
6
Turn the Power on and Play
Turn the Power on and Play
To turn the power on
Always lower the amplifier’s volume all the way before turning the power on.
Turn the amplifier
’
s power on and raise its volume.
When using batteries When using an adapter
• POWERswitchoptions
eco: If the
is not used for about 25 minutes, it will be set to standby.
The
will not be set to standby as long as there is a signal input from a bass guitar.
OFF:
When set to “OFF”, the can be powered from a USB bus by connecting it to a computer’s USB port.
HINT
Bottom of the unit
Connect the AC adapter and set the
POWER switch to ON.
Insert batteries into the battery
compartment and set the POWER
switch to ON.