ZoomCam 100 Quick Start Guide
The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty of representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organisation of such changes.
Congratulations on purchasing ZoomCam 100. This manual tells you how to install and use the camera.
Software Installation Please note that you must install the software BEFORE you connect the camera to the USB port of your computer. Step 1: Install Ulead Photo Express 1. Insert the software CD into the CD-ROM drive of your computer. 2. Follow the on-screen instructions to install the software. The software will install automatically. Note: If the software does not setup automatically, go to the Taskbar and click Start, then click on Run, select Browse and choose SETUP.
Removing the Camera’s Software and Driver You should only do this if you will no longer be using the Camera. To Remove Camera Application Software: Step 1: Click Start menu (on the left-bottom taskbar). Step 2: Move cursor to Settings in Start menu and select Control Panel. Step 3: Click on Add/Remove Programs in the Control Panel. Step 4: Select Ulead Photo Express and click on the Remove icon. Step 5: Click Yes to confirm you want to uninstall.
Getting Started Inserting or Replacing the Batteries Make sure to power OFF the camera before you change the batteries. Slide the compartment cover open and insert/replace the 2 AAA alkaline batteries. After inserting/replacing the batteries, you can immediately use the camera. Always make sure to download pictures before your batteries run out. Loss of battery charge may result in loss of stored pictures.
Camera Display Panel Here is a list of the icons that appear on the Camera Display Panel. The Mode and Snapshot buttons can be used with the display to select an option. Use the Mode button to click through the options. When the desired option symbol is displayed, press the Snapshot button to select it. For example, to shut off the camera, you would press the Mode button one or more times to display OF on the LCD Screen. Pressing the Snapshot button would shut off the camera.
F5 Select 50Hz to reduce flicker caused by Fluorescent Lights if your local AC power is 50 Hz. F6 Select 60Hz to reduce flicker caused by Fluorescent Lights if your local AC power is 60 Hz. Lo Battery Low. Please download your pictures from memory to your PC first, and then change the batteries as soon as possible.
Technical Support Your first avenue of support should be through the organization that provided you with your Zoom Camera. If you still desire to directly contact Zoom Technical Support, please feel free to do so. For your records, and to facilitate Technical Support from either your equipment supplier or Zoom, please write down the following information when you receive your Zoom Camera.
(617) 423-2564 Please note that the customer is responsible for any charges (including brokerage or customs and duties) associated with shipping the defective unit to Zoom for repair. During the first year Zoom will pay return shipping to the customer by common carrier. After the first year the Customer may be required to pay a nominal shipping and handling fee. Any applicable customs, duties and brokerage charges to import the product are the responsibility of the customer.
CE Compliance Statement Hereby Zoom declares that this modem is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Zoom vakuuttaa täten että modeemi tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
0113A 27278 © 2003
