User manual

18
Controlling audio recording
1. Click and drag the Microphone volume control to the desired level. This will determine the capability of
your audio capture device’s pick-up level while capturing.
2. Click the Record button (with the Audio Channel active) to test audio capturing level. The sensitivity of
your audio recording is reflected on the Audiometer located at the right hand side of the Video capture panel. (Note:
Set the Speaker volume control to mid level for manageable testing).
3. Click the Play button to listen to the playback.
4. Start the actual recording when satisfied with the volume in the playback.
Controlling the sound output
1. Click and drag the Speaker volume control to the desired level.
2. Play an audio file to listen to the volume level. If you hear no sound when the Audiometer indicates audio data,
try adjusting the volume control higher or check your speaker’s connection.
Opening a video/audio file
To preview previously saved audio and/or video file:
1. Click the Open button.
2. Locate the file you want to play back (*.exe or *.wav file).
3. Click Open. This closes the Open dialog box.
4. Click the Play button