User Guide

Input settings
Applying delay to input signals (Input Delay)
84
Applying delay to input signals (Input Delay)
1. Press m.
2. Use e to select INPUT,
and press E.
3. Use e to select Input
Delay, and press E.
4. Use e to select the track,
and press E.
HINT
Select All to set all the tracks at the same time.
5. Use e to adjust the delay
time, and press m.
HINT
This can be set from 0 to 30.0 ms.
NOTE
When Sample Rate is set to 192kHz, Input Delay is disabled.
If there are differences in the timing of input sounds, use this function to correct them when recording.