Operation Manual
Slate mic/slate tone
Recording a slate tone (Slate Tone)
101
F8 Multi Track Field Recorder
1. Press .
2. Use to select “
SLATE
”,
and press
.
3. Use to select “
Slate
Tone
”, and press .
▶ Continue to one of the following procedures.
Setting the volume ............................................................P.101
Setting the frequency ........................................................P.102
Setting the routing ............................................................P.102
Recording ...........................................................................P.103
Disabling the slate tone ....................................................P.104
Setting the volume
4. Use to select “
Level
”,
and press
.
5. Use to adjust the level,
and press
.
HINT
This can be set from −20 to 0 dBFS.
By adding a slate tone when the recording starts, aligning audio to video during editing will be easier. You can also use a slate
tone to coordinate levels with connected equipment.
Recording a slate tone (Slate Tone)