Operation Manual

Slate mic/slate tone
Recording a slate tone (Slate Tone)
102
Setting the frequency
4. Use to select
“
Frequency ”, and press .
5. Use to adjust the
frequency, and press
.
HINT
This can be set from 100 to 10,000 Hz.
Setting the routing
Set the destination for the slate tone signal.
4. Use to select “ Routing ”,
and press
.
5. Use to select the tracks/outputs for slate tone
signal routing and press
.
Clear all settings
Set all to postfader
Select postfader
Off
HINT
Press
to switch between Postfader and Off.
Recording a slate tone (Slate Tone)
(continued)