Operation Manual
Recording
Recording process
22
Recording process
Connect
Turn power
on (→ P.16)
Prepare before
recording
Record
(→ P.26)
Play back
and check
(→ P.40)
Check take
information
(→ P.50)
• Connect mics, instruments,
audiovisual equipment and
other devices to Inputs 1–8.
(→ P.7)
• Connect a mic capsule to the
MIC IN connector. (→ P.8)
• Press to start and
to stop recording.
• You can also set marks.
• Press to start
recording a new track.
• Press to pause
• Press to start playback
and or to stop it.
• Marks, for example, can also
be set. (→ P.119)
• Check and edit
metadata.
1. Set the SD card and file format
for recording. (→ P.23)
• Set the recording file format for each
SD card separately.
2. Select the recording tracks
(→ P.24)
• Use track keys to select. The
indicators for selected tracks light red
and you will be able to monitor input
sounds.
• Press two track keys simultaneously
to link them as a stereo track.
3. Make recording settings
• You can make other settings,
including dual channel recording (→
P.30), pre recording (→ P.32), high
pass filter (→ P.59) and limiter (→
P.60) functions.
4. Adjust the input levels
(→ P.25)
• Use to adjust each input.
• The side mic level can also be
adjusted when using a mid-side mic
capsule.
Recording with the follows the process shown below.
The data created for each recording occurrence is called a "take".