Operation Manual

Recording

1. Press .

This starts recording.

HINT

If the timecode function is enabled, recording will start from

frame 00 (00 or 02 when using drop frame) and ﬁles will

always end exactly on a second. This makes synchronization

easy when editing later.

2. Press to start a new take when recording.

This will end the current take and start a new take while

continuing to record without interruption.

NOTE

Pressing

during recording is only possible after record-

ing for at least a second.

3. Press to pause.

NOTE

• When pausing, pausing will occur at a whole second

increment.

• When recording is paused, a mark is added at that point.

Press

to resume recording.

• A maximum of 99 marks can be added to a take.

HINT

• During playback, you can press

and to jump to

points where marks have been added.

• You can also add marks without pausing. (→ P. 119)

4. Press to stop.

NOTE

• If the maximum ﬁle size is exceeded during recording (→

P.33), recording will continue in a new take with a number

that is one higher. No gap in sound will occur between the

two takes when this happens.

• When recording on 2 SD cards simultaneously, if recording

should stop on one because it runs out of space, recording

will continue on the other SD card without interruption.

HINT

• Files are automatically saved at regular intervals during

recording. Even if the power is interrupted or another

unexpected problem occurs during recording, an affected

ﬁle can be restored to normal by playing it with the

• Press and hold when the HOME screen is displayed to

check the name that will be given to the next take recorded.