Operation Manual
Input settings
Adjusting the input signal monitoring balance
56
Adjusting the input signal monitoring balance
1. Open the mixer on the Home
Screen. (→ P.11)
2. Adjust the parameter settings.
■ Editing operations
Move cursor or change value: Turn
Select parameter to change: Press
Parameter Setting range Explanation
Fader Mute, −48.0 – +12.0 dB
Adjusts the level of the input
signal.
Panning L100 – Center – R100
Adjusts the left-right stereo
position of the sound.
HINT
• You can turn
to move the cursor, and also adjust the settings
of the MAIN OUT 1/2 and SUB OUT 1/2 signals. (→ P.78)
• When a fader or pan knob is selected, press and hold to
reset it to its default value. If already set to its default value,
selecting a fader mutes the track.
NOTE
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.
• These volume and pan settings only affect the monitoring signals
and the data being recorded on the L/R track.
• Settings are saved separately for each take that is already
recorded and can be changed during playback. (→ P.41)
• Mix settings are not saved with the take when the recorded file
format is MP3.
You can adjust the volume and panning of each input signal when monitoring during recording.