Operation Manual

Input settings
Input limiter
62
Setting the attack time
This sets the amount of time until limiting starts after the
input signal exceeds the threshold.
5. Use to select “ Attack
Time
”, and press .
6. Use to adjust the time,
and press
.
HINT
This can be set from 1 to 4 ms.
Setting the threshold
This sets the level at which the limiter begins operating.
5. Use to select
“
Threshold ”, and press .
6. Use to adjust the
setting, and press
.
HINT
This can be set from −16 to −2 dBFS.
Input limiter (continued)