Operation Manual
Input settings
Delaying input signals (Input Delay)
68
Delaying input signals (Input Delay)
1. Press .
2. Use to select “
INPUT
”,
and press
.
3. Use to select “
Input
Delay
”, and press .
4. Use to select the input,
and press
.
HINT
Select “
ALL
“ to set all inputs at the same time.
5. Use to adjust the delay
time, and press
.
HINT
This can be set from 0 to 30.0 ms.
NOTE
When Sample Rate is set to 192kHz, Input Delay is disabled.
If there are differences in the timing of input signals, use this function to correct them when recording.