Operation Manual

Connecting mics/other devices to Inputs 1–8

Connecting mic capsules

A ZOOM mic capsule can be connected to the MIC IN connec-

tor on the back of the

NOTE

• The mic capsule input is assigned to tracks 1/2.

• When a mic capsule is connected, Inputs 1/2 cannot be used.

Connecting and disconnecting mic capsules

1. Remove the protective caps from the and the

mic capsule or extension cable.

2. While pressing the side buttons on the mic capsule or

extension cable, connect it to the main unit, inserting

it completely.

3. To disconnect the mic capsule or extension cable, pull

it away from the main unit while simultaneously

pressing the buttons on its sides.

NOTE

• Do not use too much force when disconnecting. Doing so

could damage the mic capsule, extension cable or main

unit.

• Reattach the protective cap when a mic capsule is not

connected.

Stereo input

By enabling the stereo link for tracks 1/2, 3/4, 5/6 or 7/8, the

corresponding Inputs (1/2, 3/4, 5/6 or 7/8) can be handled as a

stereo pair. (→ P.24)

When linked, Input 1, 3, 5 or 7 becomes the left channel and

Input 2, 4, 6 or 8 becomes the right channel.

Connecting mics/other devices to Inputs 1–8 (continued)