Operation Manual

TIMECODE

Setting how timecode is initialized at startup (Start Timecode)

1. Press .

2. Use to select “

TIMECODE

”,

and press

3. Use to select “

Start

Timecode

”, and press .

4. Use to set how

timecode is initialized, and

press

Setting value Explanation

Restart Time

When the

starts, the value set by Restart (→ P.94) is

used to jam the internal timecode.

RTC

When the

starts, its timecode is restored from the

timecode when the power was turned off and advanced by

the elapsed time using the Date/Time (RTC) setting

(→ P.17).

Since RTC is less precise than internal timecode, discrep-

ancies will occur.

Since internal timecode stops when the is turned off, the timecode is automatically initialized (jammed) during startup.

You can set the value that is used for jamming at that time.