Operation Manual

Slate mic/slate tone

Recording with the slate mic (Slate Mic)

F8 Multi Track Field Recorder

Recording

4. Press to start recording.

5. Push to the left, toward the mic symbol and

release.

6. To disable the slate mic, push to the left,

toward the mic symbol again and release.

NOTE

• When the slate mic is in use, other signals input to the tracks that

it is routed to are muted.

• The slate mic signal is always routed to the headphone L/R chan-

nels regardless of other routing settings.

• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the

levels of the slate mic and slate tone.

HINT

If you push and hold

to the left, toward the mic symbol for two

or more seconds, the slate mic will be enabled until you release the

switch.

5. Use to select the tracks/outputs for slate mic

signal routing and press

Clear all settings

Set all to postfader

Select postfader

Off

HINT

Press

to switch between Postfader and Off.

NOTE

Routing to tracks 1–8 is not possible when operating the

an audio interface (Stereo Mix).

6. Press .