Operation Manual

Calibrating the pedal

■ Calibrating the sensitivity

• TurnthepowerswitchONwhilepressing .

• Operatethepedalasinstructedonthedisplay,andpress when

required.

• "Complete!"willappearbeforeplaymodebecomesactive.

NOTE

Calibrate in the following cases.

−Stepping on the pedal has little effect.

−The volume and tone changes greatly even when the pedal is only pressed lightly.

■ Adjusting the torque

• Insertthehexkeyintothetorqueadjustmentscrewonthesideofthepedal.

Turn it clockwise to tighten the pedal, and turn it counterclockwise to loosen

the pedal.

Loosen Tighten

NOTE

Be careful when loosening a torque adjustment screw, because if you loosen it too much, it could come off

inside the unit, making it impossible to hold the pedal in place.

Using the pedal