User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
17
Using the output booster
The output booster function affects the signal just before output, emulating a
tube booster.
Setting the boost level
• Turn .
NOTE
• Turn all the way to the left to turn boost OFF.
• Turning this right increases the boost amount.
Adjusting the audio quality
• Turn .
Knob centered
Frequencies are not adjusted.
Knob turned left
Low frequencies are emphasized.
Knob turned right
High frequencies are emphasized.
Adjusting the master level
• Turn .
NOTE
• The setting range is -∞ - +6 dB.
• When the knob is centered the setting is 0 dB.