User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
25
Adjusting the USB audio monitoring balance
• On the USB AUDIO screen, turn to select MONITOR BALANCE.
• Press .
• Turn to adjust the monitoring balance.
NOTE
• This adjusts the balance between the DAW software (computer) output and the direct monitoring signals.
• The setting range is 0–100.
• The balance will be only the direct (live input) signal when set to 0 and only the output from the DAW
software (computer) when set to 100.
• Press to confirm the monitoring balance.
Changing USB audio settings